Feature:
1. 5 Blades Design: High safety with 5 biaxial vertical blade design. Because the blade is fixed in the flange, so there is no danger of blade falling off.
2. High Wind Utilization Rate: The wind blade adopts reinforced fiber nylon, which is more durable and strong wind resistance. In particular, the optimized aerodynamic shape and structure design, high wind energy utilization. The wind turbine can be started in light winds and adapted to 360 degree winds, without the need for a yaw system.
3. Stable and Wide Application: Vertical wind turbines are quieter than horizontal shaft turbines. Double bearings make the wind turbine work more stable, not easy to shake. Silent rotation, suitable for home, Marine, monitoring use, solar and wind systems.
4. Three Phase Permanent Magnet: Three phase permanent magnet alternating current can effectively reduce the drag moment of wind turbine. It also makes the wind turbine match better with the generator and work more reliably.
5. Environmentally Friendly and Low Carbon: Screw pile can be used for vertical shaft wind turbines. Compared with concrete installation, cost saving, convenient installation. The screw pile base can be fully recovered at the end of its life.
Specification:
Item Type: Wind Turbine Generator
Material: Plastic, aluminum alloy, stainless steel
Weight: Approx. 10250g/361.56oz
Single Blade Size: 42x59cm/16.54x23.23in
Controller Voltage: 12V 24V (automatic identification)
Controller Protection Level: IP67
Installation Method: Flange mounting
Number of Blades: 5 pieces
Rated Wind Speed: 11m/s
Safety Wind Speed: 45m/s
Generator: Three phase AC permanent magnet synchronous generator
Adjustment Mode: Wind angle automatic adjustment
Application: Applicable to monitoring, applicable to street lights, etc..
Package List:
5 x Wind Turbine Blades1 x Controller1 x Hex Wrench14 x Screw4 x Nut8 x Spacer4 x Large Washer10 x Small Washer1 x Flange1 x Mounting Plate1 x Instruction Manual
Note:
When installed on the ground, try to choose an open area, the recommended installation height of the fan is not less than 6m, because the higher it is from the ground, the greater the wind speed and the smoother the airflow. When installed on the roof, it is recommended that the distance from the surrounding obstacles is more than 5 meters. Trees and all kinds of buildings to form obstacles to airflow, airflow in front of these obstacles and the rear will form a very high and wide stagnant and turbulent airflow city, should avoid the fan installed in this city.
