Label:yes
Manufacture Country: China
Hign-concerned Chemical : None
Material : ABS
Item Type : Cables, Adapters & Sockets
STYLE 1Highlight description:[Compatibility]This dual USB phone charger socket is compatible with Transporter T5 2003-2009 and not compatible with T5.1 models above 2010. Please make sure the model before purchasing.
[Good Material]This phone charger socket is made of premium ABS material, which is durable to use. It has dual USB ports and has blue light, easy to find it in the dark.
[Detail Information]The output current: 3000mA, input voltage: 12-24V, output voltage: 5V. The working temperature: -20-60℃. It is easy to install on the car. Note that confirm the length and width of the mounting holes, which are 28.3mm and 23.4mm respectively.
[Widely Uses]This product is suitable for charging smartphones, tablets, laptops, computers, mp3 players, mp4 players, etc. It can serve you for a long time.
Detailed description:Parts List:1/2 ×Dual USB Phone Charger Socket 1/2×Wire Harness
Product Name: Dual USB Phone Charger Socket
Product material: ABS
Product packaging size: 10×10×8cm
Color: Black
How to install:
The red wire needs to be plugged into the fuse box located under the radio or heater controls.
1. Loosen the screws securing the cover of the radio or heater control unit and remove the cover;
2. Take out the dashboard cover and the wire to the fuse box;
3. Locate fuse 19 in the middle of the middle row, remove from the charger and insert the "piggyback" fuse. Then reinsert the removed fuse.
STYLE 2Highlight description:
1.3.4A ultra-large current, which can power mobile phones, tablets, navigation, GPS, etc.
2.The product comes with a waterproof and dustproof cover, which is safer to use
3.The product is equipped with a charging power switch, which can be turned on immediately, which is more convenient to use
4.The product comes with a voltmeter, which can detect the battery voltage status at any time to prevent potential safety hazards caused by defective batteries
5.140CM power cord, fully meet the installation requirements, can be directly installed on the battery, reducing the difficulty of installation
6.Product use: It can supply power to two electronic devices such as mobile phones, tablets, GPS, etc. at the same time; it can also be used to get electricity for car refrigerators, vacuum cleaners, etc.; voltmeter can detect battery voltage
Detailed description:Parts List:Faucet bracket*1 Rearview mirror fixing bracket*1 Anti-slip gasket*1 Long screw*1 Small screw*2 Fixing nut*1
Product material: silicone + ABS plastic
Size: 5.7cm x 6.7cm/2.24"x 2.64" (approximately)
Handle: 2.2 cm / 0.87" (approximately).
Cable length: 140 cm/55.12" (approximately)
Product color: black
Voltmeter color: red
Input voltage: 10-24V
Output parameters: 5V/3.4A
Product interface: dual-port USB
Voltmeter monitoring range: 9-30V, 8-30V (with cigarette butts)
Features: fast charging, multiple protections, easy installation, motorcycle accessories
Fixing method: fixed faucet (2.2CM), fixed rearview mirror base
Wiring instructions: The red wire is ed to battery positive +, the black wire is ed to battery negative-
Applicable models: motorcycle/electric car
Note:1. There may be slight differences between the picture and the actual color of the commodity. We will try our best to show you the exact color.
2. Please allow slight dimension difference due to manual measurement.
