Made in Japan Altite bread mold no slope loaves (with lid, type) (2 [no slope])

---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer.

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- This is a 2-loaf bread mold made by Altite used by bakeries. It is durable with a board thickness of 0.7mm. Since there is no slope, the bread will have a straight, square cross section. Also perfect for sandwiches. Material: Altite (basic steel with surface aluminum plating, plate thickness 0.7mm, reinforced wire stainless steel) Country of origin: Japan Size (inner dimensions, with lid removed): width 120 x depth 240 x depth 120mm Size (external dimensions: with lid removed, outer diameter): width 135 x depth 260 x height 133mm Capacity: 3500ml full of water (approximate amount of powder is approximately 480g) Others: Requires dry firing at first use. (Please set the oven to 170-180℃ and bake for about 40 minutes. This is a 2-loaf bread mold made by Altite used by bakeries. It is durable with a board thickness of 0.7mm. The strength is further increased by adding stainless steel reinforcing wires to the four corners of the mold. Since there is no slope, the bread will have a straight, square cross section. Also perfect for sandwiches.