―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―
🛫【Certified Store on JOOM】
A Japanese seller delivering high-quality products across borders!
📦【Shipped from Japan】
We pack carefully and deliver promptly and securely.
🔍【Strict Inspection Based on Japanese Quality Standards】
Only carefully selected products of excellent quality are delivered.
📒【Japanese Instruction Manual May Be Included】
We recommend using a text recognition app for translation.
👍【If you are satisfied with the product, please "Follow" our store and leave a review!】
Your support means a lot to us 💖
―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―
★【Cut Line】Motorcycle fog lamps are a type with cut lines. When installed normally, the top will emit yellow light and the bottom will emit white light, but depending on the combination of the bracket and the light and how the light is attached to the motorcycle, the top may be white and the bottom may be yellow. Please check your preferred direction before installation.
★ [Mode switching] Yellow always on, yellow & white half always on, white always on, yellow strobe. This motorcycle fog lamp LED cut line has a total of 4 lighting modes. It is a 2-wire connection type with a red wire + black wire, and the irradiation mode can be switched even at intervals of less than 1 second by turning the power (switch) on/off. Therefore, we do not recommend wiring it all at once. It is recommended to install it so that you can freely switch the lighting mode by putting an on/off switch in the circuit.
★[Multi-angle installation] Motorcycle fog lamp LED. The small included bracket has three M8 screw holes. It can be installed standing up or hung. *Because there is a cut line, be careful when installing at 45 degrees or 90 degrees.
★[High performance] The motorcycle headlight auxiliary light is small and energy-saving, has a sturdy alloy body, heat dissipation pins distributed 360 degrees, rust-proof metal fittings, and is waterproof from around the lens to the base of the wiring, ensuring long-term use from all angles.
★[Wide range of applications] Compatible with DC12V24V, it can be used in a variety of situations such as motorcycle fog lights, motorcycle headlight auxiliary lights, bicycle modifications, electric motorcycle fog lights, and motorcycle sub-lights.
Product details
★【Aoling Motorcycle Fog Lamp, Motorcycle Fog Lamp LED Cut Line, Motorcycle Fog Lamp LED Small, Yellow White Constant Light Strobe 2-Line Spot, Motorcycle Headlight Auxiliary Light, Motorcycle Fog Light, Motorcycle Sub Light】
Material: Alloy + LED
Input voltage: DC12V-24V
Body color: Black
Emitting color: Yellow + White
Lighting modes: Yellow steady on, Yellow & White half steady on, White steady on, Yellow strobe
Emitting beam: Spot
Wiring method: Red wire + Black wire -
Mounting screw diameter: M8
Product Features
★【Cut Line】Motorcycle fog lamps are a type with cut lines. When installed normally, the top will emit yellow light and the bottom will emit white light, but depending on the combination of the bracket and the light and how the light is installed on the motorcycle, the top may be white and the bottom may be yellow.
★[Mode switching] This motorcycle fog lamp LED cut line has a total of four lighting modes: yellow constant, yellow & white half constant, white constant, and yellow strobe. It is a two-wire connection type with a red wire and a black wire, and the lighting mode can be changed even at intervals of less than one second by turning the power (switch) on/off.
★[Multi-angle installation] The small LED fog lamp bracket has three M8 screw holes. It can be installed standing up or hung.
★[High performance] The motorcycle headlight auxiliary light is small and energy-saving, has a sturdy alloy body, heat dissipation pins distributed 360 degrees, rust-proof metal fittings, and is waterproof from around the lens to the base of the wiring, ensuring long-term use from all angles.
★[Wide range of applications] Compatible with DC12V24V, it can be used in a variety of situations such as motorcycle fog lights, motorcycle headlight auxiliary lights, bicycle modifications, electric motorcycle fog lights, and motorcycle sub-lights.
Note
1. There are cut lines on the motorcycle fog lights, so please check the direction you prefer before installation. Also, be careful when installing at 45 degrees or 90 degrees.
2. Since the light mode is switched by turning the power on and off, we do not recommend wiring it all together. We recommend that you install it so that you can freely switch the light mode by adding an on/off switch to the circuit.
3. Although this is a beginner's waterproofing project, considering the service life of the product, we recommend adding waterproofing measures to any gaps such as around the lens and where the wiring origins.
