Archnote Motorcycle Turn Signal Rear Square Universal Light Lamp 12V Rubber Bracket CT110 CG125 Hunter Cub Set of 4 Amber

―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― 🛫【Certified Store on JOOM】 A Japanese seller delivering high-quality products across borders! 📦【Shipped from Japan】 We pack carefully and deliver promptly and securely. 🔍【Strict Inspection Based on Japanese Quality Standards】 Only carefully selected products of excellent quality are delivered. 📒【Japanese Instruction Manual May Be Included】 We recommend using a text recognition app for translation. 🛍️【Some items may be based on international specifications】 Thank you for your kind understanding in advance. 👍【If you are satisfied with the product, please "Follow" our store and leave a review!】 Your support means a lot to us 💖 ―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹― ⚠️【Attention! Please be sure to read before purchasing】⚠️ Does this product match the conditions below? Please check carefully before placing your order. 🔌【Voltage Compatibility】 This product is designed for use in Japan and operates on 90–110V. Using it with a different voltage may cause malfunction or damage. 🔌【Plug Type】 The plug type is Type A or Type B, which is standard in Japan. You may need a plug adapter for use in other countries. 💡【Important Notes on Transformers and Adapters】 🔻 A transformer adjusts the voltage to match your device's requirements. 🔻 A plug adapter only changes the plug shape and does not convert voltage. 👉 Using only a plug adapter without a transformer may damage the product. 🚫【Disclaimer】 We are not responsible for any damage or malfunction caused by improper use without a transformer. 💬 If you are unsure, please feel free to contact us before purchasing. ―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―

About the motorcycle turn signal set: CT110 CG125 XL200R Hunter Cub type amber (orange) turn signal set with square reflector for left and right, giving your motorcycle a retro look. *These are rear turn signals, but they can also be used on the front. In addition, the wiring is equipped with a connector, making it easy to replace. ✅Features: This is a set of left and right square turn signals, which are often used on Honda's old cars. In addition, the bracket part is made of rubber, so it reduces the burden on the turn signals caused by impacts when falling or colliding. Perfect for customization, dressing up, or replacing turn signals that have deteriorated over time. *The length of the bracket is slightly shorter than the genuine product, and may slightly interfere with the license plate. In that case, you can adjust it by inserting a washer or nut. ✅High versatility: In addition to the applicable vehicles (CT110 cg125 XL200R Hunter Cub), if the size is 12V, M10, and pitch 1.25, it can be used on models other than those listed above. *Depending on the model, processing may be required. ✅Size: Turn signal lens (approx. 65.5mm square) Total length: approx. 126mm Stay length: approx. 60.5mm Wiring cord length: approx. 310mm Bolt diameter: 10mm (M10, 1.25 pitch) ✅Please note: *The square motorcycle turn signal is not waterproof, so please waterproof it if necessary. *This is a generic product, so we do not provide support for installation on individual vehicle models. Please check the dimensions and shape carefully before ordering. *This product is an overseas product, so fine scratches may occur during transportation. There may also be some burrs remaining on the cut surface. Thank you for your understanding. About the set: CT110 CG125 XL200R Hunter Cub type amber (orange) turn signals with square reflectors. This set of two turns on the left and right gives the bike a retro look. *These are rear turn signals, but they can also be used on the front. In addition, the wiring is equipped with a giboshi, making it easy to replace. Features: This is a set of left and right square turn signals that are often used on Honda's old cars. In addition, the stay part is made of rubber, so it reduces the burden on the turn signals caused by impacts when falling or hitting something. Please use it for customization, dressing up, and replacing turn signals that have deteriorated over time. *The length of the stay is slightly shorter than the genuine product, and may slightly interfere with the license plate. In that case, you can adjust it by inserting a washer or nut. High versatility: In addition to the applicable vehicle (CT110 CG125 XL200R Hunter Cub), it can be used on other models than those listed at the beginning as long as the size is 12V, M10, and pitch 1.25. *Depending on the vehicle model, processing may be required. Size: Turn signal lens (approx. 65.5mm square) Total length: approx. 126mm Stay length : Approx. 60.5mm; Wiring cord length: Approx. 310mm; Bolt diameter: 10mm (M10, 1.25 pitch) Please note: *This product is not waterproof, so please waterproof it if necessary. *This is a generic product, so we do not provide support for installation on individual vehicle models. Please check the dimensions and shape carefully before ordering. *This product is an overseas product, so fine scratches may occur during transportation. There may also be some burrs remaining on the cut surface. Thank you for your understanding.