Carbonator Cylinder Tank Refill Adapter Fill Adaptor Filling Station

Product Description: Brand new high quality Made of high-quality materials for durability So da Carbonator Cylinder Fill Adapter Fill Adapter Fill Station Material: Brass Type: without Gauge-CGA320, without Gauge-W21.8, with Gauge-CGA320, with Gauge-W21.8 (optional) how to use: 1. Screw the adapter onto a commercial cylinder 2. Screw the empty so da gas bottle into the adapter 3. Open the valve of the large cylinder 4. After about 15-20 seconds, the cylinder is completely full 5. Close the valve of the large cylinder 6. Open the exhaust screw to exhaust the remaining gas 7. Check the inflation connector - complete When using, be sure to pay attention to the following points: 1. The seal is in the correct position. So, when you receive a so da bottle inflation fitting, make sure to use the correct seal on the correct side. 2. Make sure the so da bottle is on the correct side. The bottle can only be installed on side of the circle. Therefore, you have to put the so da bottle into the hexagonal . Thread type 1 (outlet valve diameter 21mm) Tank CGA320 Valve (U SA, CAN, Brazil, Colombia, Philippines…) Thread type 2 (outlet valve diameter 22mm) DIN477/W21.8-14/JIS m22-14 Tank Valve (KOR, JP, UK, Germany, France, Poland, Norway, Switzerland, Russia, Ukraine, Africa, Sweden, Chile, Czech Republic, Singapore,…) Package Included: 1 * Filling Adapter Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data.