Picture-heater "Azure Coast" on film Monocrystal 120x200cm/1kW/220V
- This is a stylish and efficient infrared wall heater that provides local additional heating to rooms.
The product is durable and economical, guaranteeing a warm and healthy environment.. Infrared heat, similar to the sun's rays, directly heats things, people and animals, rather than the air, making it effective even in cool rooms.. Warm painting Monocrystal - a stylish interior element This product not only warms, but also decorates the interior, creating coziness and giving positive emotions. A bright picture-heater on the wall does not clutter up the room, gives positive emotions and useful warmth.
The image on the heater is printed on durable laminated infrared electric PET film with a thickness of 0.08 cm.
The Monocrystal heater is suitable for use in rooms up to 15 m².: apartment, house or industrial and administrative buildings. It can be used both in damp rooms and outdoors.: on terraces, in garden houses, winter gardens, garages and the like.
It has a small weight and can be stored and transported in a roll.
Warm picture Monocrystal - innovative and safe heating technology Thanks to silent, ecological and fire-safe characteristics, the heater is an ideal choice for any environment. Does not cause burns.
Soft heat ionizes and purifies the air, the device does not burn oxygen and does not dry out the air.
The principle of operation of infrared film is based on the passage of electric current through a graphite layer that emits infrared heat.
The heater is equipped with a 220 V power cable, profiles and a loop for wall mounting, as well as an overheating protection sensor that limits the surface temperature to 50°C ± 5°C.. Thanks to careful insulation of current-carrying parts and laminated surfaces, the product is absolutely electrically safe.
Specifications:
The size: 120 x 212 cm
Voltage: 220 V ± 22 / 50 Hz
Power: 1000W ± 150
Surface temperature 50 ± 5°C
Power cord length: 120 cm
Wall mount only
Safety rules
ATTENTION! The wall-mounted photo heater is an electrical appliance that must be used in strict compliance with safety regulations.
To prevent electric shock, the following must be observed::
Do not use the painting if the plug or wire of the electrical cord is damaged.
Do not connect the painting to the power supply earlier than 30 minutes after moving it from a cold to a warm room.
Do not turn on the picture heater while the picture is rolled.
Do not use the painting in areas where it may be flooded or exposed to water or other electrically conductive liquid.
Do not flood the painting with water or other electrically conductive liquids.. In case of contact with water or other electrically conductive liquids, do not use the painting until it is completely dry.
Do not bend a painting with a diameter smaller than the minimum allowable (10 cm). During use and storage of the painting, do not allow it to deform. (folds).
Do not apply significant point loads to the surface of the painting. (do not pierce, do not cut).
Do not leave the photo heater on unattended.
Do not cover the photoheater with foreign objects. Heat should come out of it freely.
Do not sleep/lie on the heater.
For wall use only. The picture should be placed on a flat wall surface with the power cord facing down.
