★★★★★★★★★★★
We are selling from Japan.
Our Products are Authentic only.
★★★★★★★★★★★
[Compatible models] Yaris Cross [Compatible models] From January 2024 [Compatible models] 5BA-MXPB 10/15 6AA-MXPJ 10/15 [Product contents] ・Wiring kit ・Plastic remover ・Installation manual
After closing the driver's door, fastening the driver's seat belt, and turning on the engine, the brake hold function automatically goes into standby mode.
Easy to install with a complete coupler on! Installation is a complete coupler with connectors attached to all wiring destinations, so it can be easily installed without damaging the original wiring. Also, this product can be turned on/off! After fastening your seat belt, simply press and hold the brake hold button to return to the original state! No need for troublesome removal during vehicle inspection!
Brake hold can be used in conjunction with our "one-touch turn signal" and "tire pressure monitoring and warning system"! For simultaneous connection, simply connect the products in series in any order! If you purchase them at the same time, you can do the work at the same time as installing this product, so you can save yourself a lot of trouble!
Brake Hold is a convenient feature that allows you to take your foot off the brake pedal while the vehicle is stopped, such as when waiting at a traffic light.
However, in the original version, the brake hold function is canceled when you turn off the engine, open the door, or take off your seatbelt, and you have to press the switch each time.
By installing the ``Auto Brake Hold Kit,'' you can automatically turn on the brake hold function every time you start the engine, refasten your seat belt, or open or close a door without having to press the HOLD button each time.
[Product contents]
・Wiring kit
・Plastic remover
・Installation manual
[Notes]
*If you remove your seat belt or open the driver's door while the brake is on hold, a warning message will appear and the parking brake will be forcibly applied. Also, if the vehicle is stopped for more than 3 minutes with only the hold brake applied, the parking brake will also be applied. (Equivalent to genuine specifications)
*If you start the engine while in standby mode, the car's own system protection will be activated and operation of the brake hold function will not be permitted, resulting in the error "Brake hold cannot be turned on due to system protection."
In that case, you will not be able to use the functions of this product.
By removing system protection, you can use the product's features.
Please contact your dealer for information on how to cancel standby mode and system protection.
