3 in1 PH Tester Water Moisture Light Test Meter Kit For Garden Plant Flower
Features: FUNCTION: Test moisture, pH value and sunlight level of plant with our meter, quickly helps you specialize in grasping when you need to water your plant, control the pH value in the and about whether it gets adequate sunlight.
ACCURATE AND RELIABLE: Premium Double-needle Detection Technology strongly enhances the speed and accuracy of detecting and analyzing moisture and pH acidity, refuse to be a of plants, promote plant growth in a healthy way.
EASY TO USE: No batteries needed, just insert the sensor probe into the about 2-4 inches, toggle to test moisture, pH, sunlight you would like to measure, then wait for a few minutes the pointer stops swinging to get a stable reading on the scale dial. If the plant is very dry, the pointer will not swing, that means your plant needs water.
INDOOR & OUTDOOR USE: Design to be lightweight and portable, easy to carry around for outdoor use, ideal test tool kit for home plants, garden, and farm. Specifications:
Probe length: about 170mm
Material: plastic + stainless steel
PH range: 3.5-8ph (acid 3.5-7, alkali 7-8)
Humidity range: 1-10 (1-3 seconds, 3-7 nor, 7-10 wet)
Relative light: 0-2000 (0-200 low, 200-500 low +, 500-1000 nor, 1000-2000 high)
Humidity value (1-10rh)
1-3 (red): need watering
4-7 (green): good humidity
8-10 (blue): too wet
PH value (8-3.5)
Neutral solution: = 7
Acid reaction: < 7
Alkaline reaction: > 7
Brightness value (0-2000 )
The higher the value, the greater the light intensity
Helps you determine if the plant is getting enough light
instructions:
Step 1: change humidity / pH / light position
Step 2: insert the probe into the ground about 2-4 inches
Step 3: adjust the probe position until the pointer on the dial is slightly balanced
Step 4: after 10 minutes, record the humidity / pH / light level on the dial
Step 5: remove the probe from the ground and wipe it after each use
Label: Yes
Material: Plastic
