Coolbe: Produktet kan forårsake en allergisk reaksjon. Les instruksjonene og informasjonen på pakken før bruk. For å få mer informasjon, kan du kontakte selgeren eller produsenten direkte.
-----
Coolbe: Informasjon om varen er oppgitt av selgeren. Uavhengig av denne informasjonen har varen ingen forebyggende, diagnostiske, terapeutiske, rehabiliteringsegenskaper, er ikke et legemiddel, skal ikke brukes til medisinske formål og er ikke et medisinsk produkt. Ta kontakt med en spesialist.
-----
Feature:
1. Stable Power: Tattoo machine pen adopted powerful motor, with strong power and stable strength, speed up to 10000 RPM at 8V voltage, which is suitable for both tattoo liner and shader.
2. Long Endurance: Tattoo power supply built in 1300mAh battery, with 5 types of voltage can be adjusted, can work 5 to 8 hours under fully charged state, which is suitable for large area tattoo.
3. RCA Connection: Power supply and tattoo pen adopted standard RCA interface, provide tight connection, which is not easy to loose, suitable for tattoo shop and tattoo artists use.
4. Cordless Use: Rotary tattoo machine pen does not need the additional tattoo foot pedal and tattoo clip cord, which allow you can tattoo freely anywhere and anytime.
5. Use Needle: Cordless rotary tattoo machine adopted aluminum alloy material, you can rotate the pen to adjust the length of the needle, which is suitable for most cartridges needles.
Specification:
Item Type: Cordless Power Supply Tattoo Machine Pen Kit
Material: Aluminum alloy, electronic components
1. Tattoo Pen
Interface: RCA Interface
Suitable Needle: Most cartridges needles in the market
Length: Approx. 86mm 3.39in(Without Needle)
Diameter: Approx. 32mm 1.26in
Speed: 8V 10000RPM
Recommended Operating Voltage: 5-8V (no more than 8V)
2. Tattoo Power Supply
Interface: RCA Interface
Battery: Built in lithium battery 1300mAh
Diameter: Approx. 25mm 0.98in
Length: Approx. 63mm 2.48in
Output Voltage: 6V 7V 8V 9V 11V
Charging Time: About 3 hours
Working Time: 5-8 hours
Charging Interface: Type C5V1A
Tattoo Power Supply Operation:
1. Long press the power button onoff, under the starting state, short press the power button to adjust the voltage: 6V, 7V, 8V, 9V, 11V, each click on the on key, switch the voltage change, 6V 1 light; 7V 2 lights; 8V 3 lights; 9V 4 lights; 11V 5 lights; Light from left to right, a total of 5 gears 5 lights, in turn cycle.
2. When the power is off, press the "on" button to display the power: 1 light on means that the power is less than 20percent ; When 2 lights are on at the same time, 20percent ~40percent ; 3 lights at the same time 40percent ~60percent ; , 4 lights at the same time 60percent ~80percent ; The 5 lights are 80percent to 100percent .
Tattoo Pen: install a cartridges needle, adjust the length of the needle, can directly plug in the cordless tattoo power supply operation, also can connect the tattoo wire and wired power supply and foot pedal operation..
Package List:
1 x
Tattoo Machine Pen1 x Cordless Power Supply1 x Tattoo Clip Cord1 x USB Charging Line
