LABRICO Iron Series
The heavy and classy "wood x iron" complements your space and matches a variety of places and styles.
Product Dimensions:
Width 3.4 x Depth 0.9 x Height (Top Cap): 3.9 - 4.8 inches (10 - 12.2 cm); Bottom Cap: 0.2 inches (0.5 cm).
Working Load:
If the load is applied to one side of the pillar, please use up to 22.0 lbs (10 kg). It may fall over. (Shelfboard weight is included when using shelf).
Working load is tested value. The conditions may vary depending on the location of the installation and the wood used.
Precautions for Installation
This product is for indoor use only.
This product is designed to be installed on commercial 1 x 4 materials (0.7 x 3.5 inches (19 x 89 mm)). The product is intended to pull the floor and ceiling.
Please prepare 1 x 4 materials that are 3.0 inches (75 mm) shorter from the ceiling height.
The size used is up to 72.8 inches (1,850 mm) vertically.
If the 1x4 material used has warping or warping, it may not be possible to install or install properly.
Please install it in a sturdy place on the underground. Installation in a weak place may cause falling, or damage to the ceiling.
Do not install on sloped ceilings or floors. Please also install it vertically.
・This product is intended for the height of a ceiling in an average home.
For vertical tension only. Do not use horizontally.
Please do not use in places that are exposed to high temperatures, outdoors, direct sunlight, bathrooms, humid places, and places with water.
Please do not hang your bicycle, TV or valuables as it may tip over.
Precautions for Use:
Do not crank or hang
Please do not place dangerous items, valuables, or items that may be damaged.
The adhesion of deodorizers, air fresheners, cosmetics, hairstylists, acid detergents, alkaline detergents, oils and organic solvents (benzine, thinner, etc.) may cause degradation. Remove immediately
If any abnormalities such as damage or cracking, please discontinue use immediately.
We cannot accept compensation for unavoidable forces such as celestial disasters, deterioration, modification, faulty or accidents due to incorrect use.
Products brought outside of Japan are not subject to compensation.
Set Contents: Adjuster set x 1, screw x 4, pad x instruction manual (English language not guaranteed); Working load: 22.0 lbs (10 kg) (when load is applied to one side against the pillar); Color: White
Compatible woods: 1 x 4 wood; Mounting dimensions: Height up to 72.8 inches (1,850 mm); Wood cutting guide: Please prepare wood 3.0 inches (75 mm) shorter from the ceiling height
Material: Body: Iron, epoxy resin powder coating; Pad: Synthetic rubber; Screws: Iron, plating + baking paint
Indoor use only Do not use in high temperatures, outdoors, direct sunlight, bathrooms, humid places, and places with water
Made of iron with simple and rigid design Easy installation even for DIY beginners with Phillips screwdriver and included screws
