304 Stainless Steel Cable Tie Buckle 6.4/10/12/16/19mm L-type Turnbuckle Wrap Zip Ties Packaging Tooth Buckle Connector

Width : 6.4/10/12/16/19mm Material : 304 Stainless Steel Type : Self-Locking Origin : China Certification : CE Material: 304 stainless steel Features: anti-aging, moisture-proof, rust-proof, acid-resistant and corrosion-resistant, easy to use Applicable to: electric power communication, mechanical chemical industry, maritime ship, rail transit, etc. Tooth use steps 1. Measure the length of the bundled object plus about 15cm per week, cut a section of stainless steel strip and bend one end by 1-2cm. 2. The wire mouth of the buckle is against the bending direction and penetrates into the tie. 3. Make a circle around the object to be bundled, and the other end goes through the buckle and leaves a section. 4. Tighten the cable tie with cable tie pliers and bend it in reverse. 5. Cut off the cable tie and use a hammer to hammer the buckle ears tightly. 6. The installation is complete. L type use steps 1.Measure the length of the bundled object plus about 15cm per week, cut a section of stainless steel strip and bend one end by 1-2cm. 2.The wire mouth of the buckle is against the bending direction and penetrates into the tie. 3.Wrap around the object to be bundled, and the other end goes through the buckle and leaves a section. 4.Tighten the cable tie with cable tie pliers and reverse bend. 5.Cut off the cable tie and tighten the buckle ear with a hammer. 6.Installed. Screw use steps 1. Measure the length of the bundled object plus about 15cm per week, cut a section of stainless steel strip and bend one end by 1-2cm. 2. The wire mouth of the buckle is against the bending direction and penetrates into the tie. 3. Make a circle around the object to be bundled, and the other end goes through the buckle and leaves a section. 4. Tighten the cable tie with cable tie pliers and bend it in reverse. 5. Cut off the cable tie and tighten the screw with a wrench. 6. The installation is complete.